TerraSAS v2.0.0.9 release
August 17, 2023

*****************************************************************
** This software release includes a mandatory firmware update  **
** Firmware must be at or above the minimum revision below:    **
** DCS80-15,5609105-01, ETS80X15 ........: V1.01	       **
** 2U CHASSIS (5609158-XX) ..............: V1.00	       **
** ETS600X8/17/25,ETS1000X10 ............: V2.11	       **
** ETS60X14,ETS80X10.5,ETS150X5.6 .......: V2.01	       **
** High Power SCR-controlled Units ......: V2.05	       **
** High Power (5702498-01) ..............: V2.02	       **
** ETS1000Y5/10/15.......................: V2.00	       **
** See enclosed software user manual for detailed firmware     **
** update instructions. If the firmware is below the minimum   **
** revision, TerraSAS shows a warning message and refuses to   **
** start.						       **
*****************************************************************

To read the user manuals you will need Adobe Reader,
which can be dowloaded free of charge from www.adobe.com

Installation on computers with an earlier version of TerraSAS:
==============================================================

- Uninstall any previous version of TerraSAS, SCPI Test and 
  Pv Firmware Updater
  (go to Control Panel and select Add/Remove Programs)
- Open the folder TerraSAS Install and double click on Setup
  to start the installation
- TerraSAS will start and might report that the System configuration
  is missing (TerraSAS systems with embedded computers already
  have a factory-generated configuration and will not display
  this warning)
- Disregard the warning message above and close TerraSAS
- Open the folder SCPI Test Install and double click on Setup
- SCPI Test will start
- Open the folder Pv Firmware Updater and double click
  on Setup
- Pv Firmware Updater will start
- Close SCPI Test and Pv Firmware Updater
- Copy the User manual M609155-01 Rev H.pdf to your desktop
- Delete any previous version of the User manual
- Copy the Example scripts v2.0.txt file to your desktop
- Delete any previous version of the Example scripts


This completes the software installation.
Please refer to the software user manual for configuration
and operating instructions.


Installation on computers that never had TerraSAS installed:
============================================================

- Open the folder TerraSAS Install and double click on Setup
  to start the installation
- TerraSAS will start and might report that the System configuration
  is missing
- Disregard the warning message above and close TerraSAS
- Open the folder SCPI Test Install and double click on Setup
- SCPI Test will start
- Open the folder Pv Firmware Updater and double click
  on Setup
- Pv Firmware Updater will start
- Close SCPI Test and Pv Firmware Updater
- Copy the User manual M609155-01 Rev H.pdf to your desktop
- Copy the Example scripts v2.0.txt file to your desktop


This completes the sofwtare installation.
Please refer to the software user manual for configuration
and operating instructions.

  





